 |
BJ45004
| Color: | Please select |
|---|---|
| Quantity: | |
3 Way Brass Thermostatic Shower Mixing Valve for Electric Solar Water HeaterThermostatic Mixing Valve is one kind of valves which is mainly used in electric water heaters or solar water heaters system. This valve can adjust the outlet water temperature to be the set value by limiting and mixing the amount of inlet hot water or cold water. It provides safety assurance by preventing high temperature when people is washing hands, taking shower or bathing.
Important Thing You Need to Know
The maximum hot water temperature at the tap should be 45°C or less for childcare centers, schools, homes for the elderly and similar facilities, and 55°C for other buildings.
Basic Information| Model Number | BJ45004 |
| Material | Premium Brass |
| Size | M1/2'', M3/4'', M1'' |
| Working Medium | Water |
| Max Working Pressure | 0.03~1Mpa |
| Hot Water Inlet Temperature | 40 °C -90 °C |
| Cold Water Inlet Temprature | 4°C-29 °C |
| Mixed Outlet Water Temperature | 30°C -55 °C |
| Tested According To TMV3 Standards |
How Does A Thermostatic Mixing Valve work?
A sensor element is placed at the mixed outlet of the thermostatic mixing valve. It drives the qmovement of the valve’s core to block or open the inlet port of the cold and hot water. When the temperature is set by adjusting the top knob, the proportion of cold and hot water entering the outlet can be changed accordingly, so that the outlet water temperature remains constant value.
When a temperature is set, if the outlet temperature is lower than the set value, the sensor element will shrinks at the cold situation. It drives the valve core to move upward, to reduce the opening port of the cold water and increase the opening port of the hot water, so that the proportion of hot water increases while the proportion of cold water decreases, then the temperature will rise after mixing and reach to the set value.
However, if the outlet temperature is higher than the set value, the sensor element will expand and drive the valve core to move downward, to increase the opening port of the cold water and reduce the opening port of the hot water, so that the proportion of cold water and hot water will be adjusted accordly, then the temperature after mixing will decrease and reach to the set value. It works again and again in this way.
Product FeatureForging process, 100% no leakage
Rapid failsafe on either hot or cold supply failure
Delivers stable mixed water temperature
Extended mixed temperature range : 30℃-55℃
Tested according to European most strict TMV3 standards
High precision machining, top quality finish, make the valve's quality stable and reliable
How To Install A Thermostatic Mixing Valve?A. All installations should be carried out by a professional plumber.
B. Before installation, flush the pipe’s impurity to ensure the system proper operation.
C. Install the pipes according to the marks on valve body. For example, connect the hot water pipe with the inlet side marked H, cold water pipe to be connected with the inlet side marked C. The last side is connected with the outlet pipe.
D. Set the outlet temperature you want by turning on the hand wheel. The 1 means lowest temperature 30℃，7 means the highest temperature 55℃. You can adjust the temperature at different value.
E. When inlets pressure is not the same, the external check valves will start to prevent cross-flow of hot&cold water .
Attention: If the ratio between two inlets is too big, one flow-limiting valve should be fixed at the side of higher pressure.
Why Choose UsCompetitive Price: We are the factory direct sale to abroad markets, that means you can get the price from the original manufactures, no any traders or middle companies.
Expertise and experience: We have a team of experts with extensive knowledge and experience in the industry for more than 25 years. We understand the complexities and nuances of our products/process/equipment, allowing us to provide high-quality solutions.
Quality Products: We prioritize delivering products that meet the highest quality standards. Every product to be delivered to our customers must be checked and approved by test before shipment. We 100% commit the quality we deliver will make you satified and exceed your expectations.
Timely Delivery: We understand the importance of delivering our products on time. Our efficient processes and logistics ensure prompt delivery, minimizing any unnecessary delays.
Innovation and Technology: We focus on innovation and devote to the latest technologies to develop cutting-edge products and solutions, to ensure that you benefit from the latest features and functionalities.
F A QQ1. Are you a factory or trading company?
A: We are a factory and trade company together. We have our own factory with different workshops and production equipment lines. Welcome to visit our factory！
Q2. Can I have a sample order ?
A: Yes, sample order can be offered to test and check quality.
Q3. Do you have any MOQ limit for one order?
A: For promotion items: No MOQ, 1pc available & For non-promotion items: 1000~3000pcs MOQ according to different models
Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by sea. It takes approx 30 days to arrive. Airline shipping can be also optional.
Q5. What’s your production lead time?
A: Sample order: 7~10 days；Bulk order: 30~45 days
Q6. Can you do OEM?
A: Yes, welcome to provide drawings or samples for customization.
Q7: Do you offer guarantee for the products?
A: Yes, we offer 3 years warranty to our products.
3 Way Brass Thermostatic Shower Mixing Valve for Electric Solar Water HeaterThermostatic Mixing Valve is one kind of valves which is mainly used in electric water heaters or solar water heaters system. This valve can adjust the outlet water temperature to be the set value by limiting and mixing the amount of inlet hot water or cold water. It provides safety assurance by preventing high temperature when people is washing hands, taking shower or bathing.
Important Thing You Need to Know
The maximum hot water temperature at the tap should be 45°C or less for childcare centers, schools, homes for the elderly and similar facilities, and 55°C for other buildings.
Basic Information| Model Number | BJ45004 |
| Material | Premium Brass |
| Size | M1/2'', M3/4'', M1'' |
| Working Medium | Water |
| Max Working Pressure | 0.03~1Mpa |
| Hot Water Inlet Temperature | 40 °C -90 °C |
| Cold Water Inlet Temprature | 4°C-29 °C |
| Mixed Outlet Water Temperature | 30°C -55 °C |
| Tested According To TMV3 Standards |
How Does A Thermostatic Mixing Valve work?
A sensor element is placed at the mixed outlet of the thermostatic mixing valve. It drives the qmovement of the valve’s core to block or open the inlet port of the cold and hot water. When the temperature is set by adjusting the top knob, the proportion of cold and hot water entering the outlet can be changed accordingly, so that the outlet water temperature remains constant value.
When a temperature is set, if the outlet temperature is lower than the set value, the sensor element will shrinks at the cold situation. It drives the valve core to move upward, to reduce the opening port of the cold water and increase the opening port of the hot water, so that the proportion of hot water increases while the proportion of cold water decreases, then the temperature will rise after mixing and reach to the set value.
However, if the outlet temperature is higher than the set value, the sensor element will expand and drive the valve core to move downward, to increase the opening port of the cold water and reduce the opening port of the hot water, so that the proportion of cold water and hot water will be adjusted accordly, then the temperature after mixing will decrease and reach to the set value. It works again and again in this way.
Product FeatureForging process, 100% no leakage
Rapid failsafe on either hot or cold supply failure
Delivers stable mixed water temperature
Extended mixed temperature range : 30℃-55℃
Tested according to European most strict TMV3 standards
High precision machining, top quality finish, make the valve's quality stable and reliable
How To Install A Thermostatic Mixing Valve?A. All installations should be carried out by a professional plumber.
B. Before installation, flush the pipe’s impurity to ensure the system proper operation.
C. Install the pipes according to the marks on valve body. For example, connect the hot water pipe with the inlet side marked H, cold water pipe to be connected with the inlet side marked C. The last side is connected with the outlet pipe.
D. Set the outlet temperature you want by turning on the hand wheel. The 1 means lowest temperature 30℃，7 means the highest temperature 55℃. You can adjust the temperature at different value.
E. When inlets pressure is not the same, the external check valves will start to prevent cross-flow of hot&cold water .
Attention: If the ratio between two inlets is too big, one flow-limiting valve should be fixed at the side of higher pressure.
Why Choose UsCompetitive Price: We are the factory direct sale to abroad markets, that means you can get the price from the original manufactures, no any traders or middle companies.
Expertise and experience: We have a team of experts with extensive knowledge and experience in the industry for more than 25 years. We understand the complexities and nuances of our products/process/equipment, allowing us to provide high-quality solutions.
Quality Products: We prioritize delivering products that meet the highest quality standards. Every product to be delivered to our customers must be checked and approved by test before shipment. We 100% commit the quality we deliver will make you satified and exceed your expectations.
Timely Delivery: We understand the importance of delivering our products on time. Our efficient processes and logistics ensure prompt delivery, minimizing any unnecessary delays.
Innovation and Technology: We focus on innovation and devote to the latest technologies to develop cutting-edge products and solutions, to ensure that you benefit from the latest features and functionalities.
F A QQ1. Are you a factory or trading company?
A: We are a factory and trade company together. We have our own factory with different workshops and production equipment lines. Welcome to visit our factory！
Q2. Can I have a sample order ?
A: Yes, sample order can be offered to test and check quality.
Q3. Do you have any MOQ limit for one order?
A: For promotion items: No MOQ, 1pc available & For non-promotion items: 1000~3000pcs MOQ according to different models
Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by sea. It takes approx 30 days to arrive. Airline shipping can be also optional.
Q5. What’s your production lead time?
A: Sample order: 7~10 days；Bulk order: 30~45 days
Q6. Can you do OEM?
A: Yes, welcome to provide drawings or samples for customization.
Q7: Do you offer guarantee for the products?
A: Yes, we offer 3 years warranty to our products.
